User's Manual

Under-bed lighting, massage), actuator will stop moving and begin to perform the button’s
function.
FLAT Buttons:
Press FLAT, actuator begin to lower, until the actuators arrive in the lowest position.
During this process, press any button (such as under-bed lighting, massage., etc.) the
actuator will stop moving, and begin to perform the button’s function.
ZG/ANTI SONRE Buttons：
Press ZG or ANTI-SNORE button, actuator will move to corresponding position. During
this process, press any button that related to the actuator, the moving action will be
stopped. If press any button that not related to the actuator (such as Under-bed lighting,
massage), actuator will stop moving and begin to perform the button’s function.
Under-bed lighting Buttons:
Press the button to turn on/turn off the under-bed light. When the light is in turn on state, if
user didn’t press the button in 10 min, the light will turn off automatically.
Massage Button:
When the head/foot massage motors are turned off, press head or foot massage button,
the head or foot massage will begin to vibrate at the first vibration level. Once press the
massage button, the vibration level will increase one gear. When the vibration strength