User's Manual

3、Function description
3.1 Learning function:
After the controller is powered on or long press the learning button, it enters the learning state.
The green light of the controller keeps flashing. In the learning state, press the "head up" and "foot
up" buttons of the remote control at the same time until the controller will emit a "tick". At the
same time, the blue headlight of the remote control flashes twice to indicate that the learning is
completed, and the green light of the controller stops flashing.
3.2 Buttons function:
There are six keys on the hand controller, "head up", "head down", "foot up", "foot down","Flat"
and “ZG”, corresponding to head up, head down, foot up, foot down, lying down and Zero Center
of gravity position function respectively.
"Head up", "head down", "foot up" and "foot down": press the button to press the corresponding
push rod action, release the key, and the push rod stops action;
FLAT button: Press FLAT, actuator begin to lower, until the actuators arrive in the lowest position.
During this process, press any button (such as under-bed lighting, massage., etc.) the actuator will
stop moving, and begin to perform the button’s function.
ZG Buttons：Press ZG button, actuator will move to corresponding position. During this process,
press any button that related to the actuator, the moving action will be stopped. If press any button
that not related to the actuator (such as Under-bed lighting, massage), actuator will stop moving
and begin to perform the button’s function.
3.3 Dial switch:
The dial switch has three gears in total: left (gear A) - middle (gear AB) - right (gear B). When
learning, dial A or B to learn bed A or bed B respectively. When controlling, dial A to control bed
A, dial B to control bed B, and dial AB to control bed A and bed B at the same time.
3.4 Low power consumption function:
When the button is pressed, the remote control starts to work, and the headlight lights up. If the
button is not pressed for more than ten seconds, the remote control enters into low power
consumption, and the headlight goes out.