User's Manual
Table Of Contents
Introduction
When connected together, Linear actuator and control system JCB35NH2A
consists of an electric height adjustable lifting system normally assembled in
height adjustable device, work stations and similar appliances.
There are six models Linear Actuator: JSET-X1-X2-X3/X4, JSED- X1-X2-X3/X4,
JS36DR- X1-X2-X3/X4,JS36DS-X1-X2-X3/X4,JS36DC-X1-X2-X3/X4,JS36DR1-
X1-X2-X3/X4.
There are one models Control system: JCB35NH2B.
The system consists of the spindle system, motor system, Control Unit, which
described above and remote control
JCHT35K/JCHT35K1/JCHT35J/JCHT35L/JCHT35M1/JCHT35M2.
The spindle system and motor is normally assembled inside the height adjustable
leg constructions to become linear actuator.
The control system JCB35NH2A is normally mounted together with lifting
system with only four screws in a reachable distance enable the user to cut off
the main power.