Quick Start Guide

Camera Introduction
Cut o the power supply before installing TF card.
Bracket
TF Card Slot
Lens
USB Power Port
MIC
Function Button
Indicator Light Louver
Speaker
*
*
Function Button:
Stop/start recording
*
Indicator Light Status:
Solid red: TF card not inserted
Red ashes: Normal condition
Camera Installation
Wipe the front windshield clean. Stick
the electrostatic sticker on the glass
and ensure that it is free of bubbles.
Insert one end of the power cable into
the USB power port.
Tear o the 3M glue on the bracket,
paste the dash camera on the
electrostatic sticker, and lay cable as
shown in the gure.
Insert the car charger into the cigarette
lighter and connect the power cable of
the camera.
Adjust the lens to the appropriate
angle, and the installation is
completed.
*