User's Manual

ESL Access Point HS_C09851 PRODUCT MANUAL
Page 14 , Total 15
Figure 5-2 ESL Access Point shortcut design interface
The configuration page contains:
（1） Network configuration: Access Point network settings, like DHCP switched IP
address, subnet mask, etc.
（2） ESL-working configuration: set the ESL-working system IP address and port.
（3） Restart Access Point: reset Access Point software.
（4） Change password：change the login password.
（5） Restore factory settings：reset all the Access Point settings.
（6） Upgrade system: upgrade the software of Access Point system and RFID sub-
systems.
6 HOW TO USE
（1） Please plug in the power source and network wire.
（2） The system is working when the Access Point is powered by either 12V DC or
POW adaptor and green light is on.
（3） The starting up time is approximately 40 seconds. All the LEDs will light up once
when complete starting up.
（4） Please first configure the Access Point IP and ESL-working system IP as
described hereinbefore.
（5） The red Nixie light will keep displaying 1 and try to make connection to the ESL-
working system at a regular time unless it is successfully connected
（6） When connected to the ESL-working system, the two digits Nixie light will display
the Access Point ID. The Access Point is now capable of communication operation
like receiving heart-beat, data communication, ESL query, etc.
7 PACKING LIST
7.1 Packing diagram