Product Manual

Hanshow ESL Controller HS_C09959 Product Manual V1.0.2
21 Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
5 Workflow
1. Before starting HS_C09959, please check if the power cord and network cable are
connected correctly in first.
2. Whether to use the standard 12V adapter or POE mode power supply
3. After powered-on, the power indicator on the HS_C09959 panel is on and the
system starts to boot.
4. The startup time is about 1min. After the system is started, both of system status
light and network status light is on, all of which indicate working status.
5. After the system starts, please follow the section of 4.2 to configure HS_C09959’s
IP and ESL-Working’s IP.
6. HS_C09959 will automatically connect to ESL-Working after the configuration is
correct. If success, network status indicator will display green; if failed, it will timing
reconnect until connection is successful.
7. After HS_C09959 is connected to ESL-Working, the two digital tubes will display
HS_C09959 ID. And HS_C09959 can perform data communication operations,
including heartbeat reception, data transceiver, and label inquiry, etc.