Product Manual

Hanshow ESL Controller HS_C09959 Product Manual V1.0.2
16 Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
Configuration item
Description
Port number
Port number of ESL-Working:
When AUTO search is set to ON, this port number is the target one
for AP accessible to ESL-Working;
When AUTO search is set to OFF, this port number is the target
one for AP accessible to ESL-Working.
SSL
Whether to use SSL to connect securely with ESL-Working
Note:
 After the domain name address of ESL-Working is set, you need to check if
DNS server is configured correctly.
 If set to SSL is enabled, please check port number is correct. In general, the
part number for connecting/nonconnecting to SSL is different.
 ESL-Working information modified will take effective about 30s later, no need to
restart AP.
Notice: Please make sure to configure ESL-Working address manually when AP and
ESL-Working is used in the cross-network segment.
4.2.4 Reboot AP
Click OK on the homepage, a confirmation box pops up, then to confirm again. The
device will reboot, as shown in Figure 4-5.
Please wait for about 1min to reboot AP.