Product Manual

Hanshow ESL Controller HS_C09959 Product Manual V1.0.2
11 Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
4 Product operation
4.1 Key operation
Reset key supports press and hold and press that owns different function respectively.
4.1.1 Press
Press is used to switch IP address acquisition mode. This feature is strictly limited and
just to operate when AP is not connected to the network. AP address will switch between
DHCP and static IP with each press.
 When AP works at DHCP client mode, its IP address will get from DHCP server.
 When AP works at static IP mode, its default settings are: IP --192.168.1.199,
Subnet mask -- 255.255.255.0, and Gateway -- 192.168.1.1.
The nixie light of AP will also give corresponding prompt:
 When AP switches to DHCP mode, nixie light will display DH, and last for 5s.
 When AP switches to static IP mode, nixie light will display ST, and last for 5s.
 When AP is not connect to ESL-Working, nixie light is always display --.
Note: The protection time between two operations is 30s, that is, if you press again
in 30s after the last successful operation, your operation will be invalid.
4.1.2 Press and hold
Press and hold reset key is more than 5s, AP will restore factory setting. And the nixie
light and LED indicators on the front panel is all being on, about 2s, changing to off, AP
will restore factory setting and re-startup.
Restore factory setting has the following contents:
 Restore to DHCP client mode
 Restore to auto search mode of ESL-Working
 Clear the custom description
 Restore web login password to admin