Product Manual

Hanshow Shelf Edge Digital Signage HS-AT3511 Product Manual
15 Hanshow Copyright Reserved ©
Zhejiang Hanshow Technology Co., Ltd.
5 Activation
Follow the steps below to activate HS-AT3511:
1. Before use shelf edge digital signage HS-AT3511, check and ensure the power
cable connection and network cable connection are correct.
2. Make sure to use the standard 12V power adapter.
3. After power-on, the backlight of HS-AT3511 display is on, and the system starts to
start.
4. The startup time is about 35 seconds. After system startup, the screen displays
standard system interface or preset playback content.
5. After system startup, configure network settings according to instructions in section
4.1, for HS-AT3511 IP settings and other configurations.
6. If the configuration is correct and complete, HS-AT3511 automatically connects to
Wi-Fi network. If the connection is successful, the network status indicator shows
the connection status and periodically reconnects until the connection is successful.
Otherwise, “!” is displayed.
Note: To use 2.4G Wi-Fi, it’s recommended to set 2.4G channel to 1, 6, or 11.