Safety Instructions

USING YOUR REMOTE
POWER OFF
POWER ON
(PRESS FOR WHITE LIGHT)
COLOR RING
• SELECT THE COLOR
OF YOUR MOOD
BRIGHTNESS
• MAKES LIGHTS
BRIGHTER OR DIMMER
SPEED
• MAKE LIGHTS
CHANGE COLORS
FASTER OR SLOWER
PRESET LIGHT PROGRAMS
• CHOOSE FROM EIGHT PRESET
AUTO PROGRAM MODES
AAA BATTERIES REQUIRED (NOT INCLUDED)
Battery Warning Statement
Do not mix old and new batteries and Do not mix alkaline,
standard (carbon-zinc) or rechargeable (ni-cad, ni-mh, etc.) batteries.
Speed+
Speed-
TO UNPAIR
Repeat above but instead of “Speed+”
press “Speed-”.
PAIRING
By default, all Monster IlluminEssence LED
light bars will be paired out of the box with
the included remote control.
TO PAIR
To pair LED light bars to another remote, simply
unplug and replug back in the LED light bars to
power and WITHIN FIVE SECONDS of plugging
back into power, press and hold the “Speed+”
until the lights blink three times.
EXPAND
EXPAND LIGHTS AND ROOMS
You can pair up to four remotes with up to 30
Monster IlluminEssence LED strips, LED light
bulbs or LED light bars.
You can have multiple remotes control the
same set of lights.
You can also have dierent sets of lights paired
to dierent remotes to control
rooms independently.
INSTALL LED LIGHT BARS
COLOR RING
Choose the color of your lights.
BRIGHTNESS
Dim from 10% - 100%.
PRESET LIGHT PROGRAMS
Eight dierent auto programs for parties,
lounging, and special occasions.
SPEED
Adjust program speeds faster for parties and
slower for an elegant change of atmosphere.
FOR TECHNICAL SUPPORT GO TO:
www.monsterstore.com/pages/contact-us
OR CALL: 1 [phone]
GET HELP
For Instructional Videos:
www.youtube.com/monsterilluminessence
GET INSPIRED
Subscribe to our Pinterest boards to
learn all the cool things you can do
with Monster IlluminEssence.
For Ideas and Inspiration:
www.pinterest.com/monsterilluminessence
Model Number
190720-03
190715-00
Model Name
LIGHT BAR RGB
RF 2.4GHz Remote
85
348
Federal Communication Commission
Interference Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV
technician for help.
The Responsible (located within the United States)
party information:
Company Name: Monster, Inc.
Address: 280 Old County Rd # 435
Brisbane, CA 94005-1301, USA
Telephone Number: 415-840-2000
Email: [e-mail]
The name and model number of the product:
Magenta Purple Blue Red
CLUB 1
Cyan Turquoise Green Red Purple BlueMagenta Orange
CLUB 2
Magenta Purple Blue Red
LOUNGE
Cyan
Turquoise Green
BEACH
OrangeYellow Sunset
SUNSET
RedGreen
CHRISTMAS
BlueRed
INDEPENDENCE
PurpleOrange
HALLOWEEN
rm 880187-00
TWO OPTIONS TO INSTALL
1. Install with Velcro
Peel o backing from adhesive
Plug the USB cable into (TV or PC) USB port or a
5V USB power supply (not included).
x 2
HOOK SIDE
x 2
LOOP SIDE
a: 6.15 inch between 2 velcro
b: ≥0.7 inch from velcro to the wall
a
b
LOOP SIDE
HOOK SIDE
STICKY SIDE
LOOPS
HOOKS
STICKY SIDE
2. Install with base support
IMPORTANT SAFETY
INSTRUCTIONS
READ AND FOLLOW
ALL SAFETY
INSTRUCTIONS
CAUTION: To reduce the risk of fire,
electric shock, or injury to persons:
a) Use only insulated staples or plastic ties
to secure cords;
b) Route and secure cords so that they will
not be pinched or damaged when the
cabinet is pushed to the wall;
c) Position the portable cabinet light with
respect to the cabinet so the lamp
replacement markings are able to be read
during relamping;
d) Not intended for recessed installation in
ceilings, or sots; and
e) The National Electrical Code (NEC)
does not permit cords to be concealed
where damage to insulation may go
unnoticed. To prevent fire danger, do not
run cord behind walls, ceilings, sots, or
cabinets where it may be inaccessible
for examination. Cords should be
visually examined periodically and
immediately replaced when any damage
is noted.”
CAUTION: To reduce the risk of
fire, do not install closer than 0.5 inches
to cabinet wall or in a compartment
smaller than 20 inches by 40 inches by
12 inches.
SAVE THESE
INSTRUCTIONS