User's Manual Part 2

CHAPTER 8. OPERATIONAL TIPS 215
by Polar 3D. Rafts and skirts, in contrast, may be of interest
with other filament materials, such as ABS.
Figure 8.1: Polar Cloud build plate PRINT SETTINGS
The Pol ar 3D Cloud 2.0 has a feature whereby you can ask
to add a brim, raft, or skirt to your object. Once you have
selected an object and clicked “3D PRINT”togetreadytoprint
it, then go to “PRINT SETTINGS”, (see Figure 8.1), and under
“BASIC”settingsscrolldowntoSupport, (see Figure 8.2). Then
under “Platform Adhesion Type” use the drop-down menu to
select “None(Skirt),“Brim”, or “Raft”, as desired; see Figure
8.3.Thenclickthegearicontoadjusttheparameters(layers,
outlines, raft infill, etc.) as desired; see Figure 8.4.