User's Manual Part 1

CHAPTER 2. START PRINTING 42
2.2.2.4 Check t emperature
At the o bject build plate screen, see Figure 2.9,clicking“PRINT
SETTINGS”intheright-handwindowwillbringupthreetabs:
“BASIC”, “ADVANCED”, and “G-CODE”. The temperatur e whi ch
the printer is set to use for printing is displayed under the
“BASIC” display, as shown in Figure 2.13.
Figure 2. 13 : Polar Cloud check t h e print temperature
The proper temperature for the PLA filament provided by
Polar 3D is 185°C. (If you are using a di↵erent type of filament,
see the filament manufacturer’s recommendation for what tem-
perature to use for it.)