User's Manual Part 1

CHAPTER 2. START PRINTING 40
ter of the build plate. Figure 2.11 shows the CALIBRATIONKEY
moved to be centered on the build plate.
2.2.2.2 Experiment with changing the size of the object
At the object build plate screen, see Figure 2.9,checkthat
“PLACEMENT”ishighlighted(inblue), meanin g th a t pla cem e nt
is the active mode; if necessary, click o n “PLACEMENT”toselect
it.
Figure 2. 12 : Bu i l l d plate screen: SCALE object
Click on the screen where the object im age is shown on the
build plate. This will bring up a set of colored axes (red X-
axis, green Y-axis, blue Z-axis) superi m posed on the object