User's Manual Part 1

CHAPTER 4. THE P OL AR CLOUD 138
index
7. Once an object has been selected by clicking on it (from
the list on the right, underneath “PLACEMENT”and“PRINT
SETTINGS”), the “PLACEMENT”tabbecomesactive. Three
axes of movement will appear centered within the object
on the build plate, and three choices of type of move-
ment, “MOVE”, “SCALE”, or “ROTATE”, along with three
slider scales corresponding to the axes, will appear on th e
right, under “PLACEMENT”andtheobjectlist. Youmay
move th e object on the build plate, change its size, or
rotate it about an axis, either by dragging and dropping
on the image of the object, or via the slider scales, while
“PLACEMENT” is selected. Figure 4.79 shows an example of
the appearance of axes when “MOVE”hasbeenselected.
Figure 4. 80 : Polar Cloud build plate PRINT SETTINGS