User's Manual Part 1

CHAPTER 4. THE P OL AR CLOUD 131
Figure 4. 76 : Polar Cloud printer Status: UPDATING PRINTER
Note that when the printer is performing an update, the LED
lights along the left-hand side of the printer will go through a
color change: the LED lights towards the bott om (3D)willturn
green, POLAR3D , and then t he green color will gradually move
up until all the lights are green, POLAR3 D ,indicatingthat
the update is complete, before the lights return to their normal
colors ( b l u e over white, POLAR3D ,foraprinterconnectedto
the Polar Cloud).
(Note th at it is also possible to perform an update directly to
the printer, without going through the Polar Cloud; see Chapter
9 for details.)
4.5.9 Printer local web interface accessed from the Po-
lar Cloud
Clicking on the “LOCAL UI”tab(orgearicontowardstheupper
right) of a specific printer’s screen (see Figure 4.56)willcause
the Polar Cloud to attempt to o pen a connection itself to the
printer’s local web interface, using what the Polar Cloud be-
lieves to be the printer’s IP address on your local network. Note