User's Manual

GuiderⅡ User Guide | www.flashforge.com 0086-0579-82273989
54
your GuiderⅡ will connect with your computer via the WIFI that you’ve set up.
②Disconnect GuiderⅡ
Click [Print]--[Disconnect] to disconnect your PC and GuiderⅡ.
6.2.14 Tool Menus
①Control Panel
After connecting PC with Guider Ⅱ , click [Tools]--[Control Panel] to open the
control panel.
6-23
● Jog Controls
a. Jog Mode：Select the distance that extruder/ build plate move a single time (that is,
the distance extruder/ build plate move upon your single click).
b. Six blue arrow direction button: Control the move along X/Y/Z axis. X/Y axis
button control extruder move, Z axis button control build plate move. Click X-,
extruder will move leftward a specified distance; Click X+, extruder will move a
specified distance rightward. Click Y-, extruder will move forward a specified distance;
Click Y-, extruder will move backward a specified distance. Click Z-, build plate will