User's Manual

GuiderⅡ User Guide | www.flashforge.com 0086-0579-82273989
51
Disconnected
Method 1：Connect Via USB Cable
a. Connect your GuiderⅡ with your PC via an USB cable.
b. Turn on your GuiderⅡ and start Flashprint.
c.Click [Print]--[Connect Machine], then select USB in the [Connection Mode]
option and select machine you want to connect in [Select Machine] option. If you can
not find your machine, click the [Rescan] button to scan your machine and select it.
Finally click [Connect] button to connect to the printer. If you still can not find your
machine after rescan, it means you haven’t installed the driver in the software.
6-18
Method 2： Connect Via WIFI
①Connect GuiderⅡ with your PC under AP mode
a.Turn on your GuiderⅡ
b.Tap [Tools]-[Setting]-[WIFI]-[WIFI ON]
c. Click on the wireless network on the left bottom, and find the wireless
signal-“GuiderⅡ”. Click [Connect] to finish network connection.
d. Click[Print]-[Connect Machine] on Flashprint. Then the following dialog box