User's Manual

GuiderⅡ User Guide | www.flashforge.com 0086-0579-82273989
26
(Note: The filament should feeds from the bottom of the spool towards the top )
4.2 Printer Start-up
4-3
(4-3)Insert the power supply into the power input on the back of the Guider Ⅱ and
plug the power cord into an electrical outlet.
4.3 Loading Filament
For stable filament loading and proper device protection, you need to install the
filament guide tube properly.
4-4
(4-4) Take out the filament guide tube, thread the filament from Filament Detecting
Equipment.