User's Manual

GuiderⅡ User Guide | www.flashforge.com 0086-0579-82273989
12
2.1.2 Terms
Build Plate
The surface on which the GuiderⅡ builds an object.
Build Tape
The blue tape that covers Guider
Ⅱ
’s build plate so that
the object can stick to the build plate well.
Build Volume
The three dimensional amount of space that an object
will use once it is completed. The largest build volume
of Guider
Ⅱ
is 280*250*300 mm.
Leveling Knobs
Knobs under the build platform that are used for
adjusting the distance between the nozzle and build
plate.
Extruder
The device that draws the filament from the spool,
melts it and pushes it through a nozzle into the build
plate.
Nozzle
Also called “print head”, which located at the bottom
of the extruder where heated filament is squeezed out.
Extruder Fan
To cool the outer assembly of the extruder and gear
motor
Filament Intake
An opening located at the top of the extruder .
Filament Guide Tube
A black plastic piece that guides the filament from the
filament box to the filament intake
Filament Cartridge
A specific box for placing Flashforge filament
PVP Glue Stick
A solid adhesive used for making the model stick to the
build plate firmly
Unclog Tool
A tool that used for cleaning the extruder
Stamping Wrench
A tool that used for seizing the nozzle’s metal cube