User Guide

19
4. Click the [Settings] and the pop-up window will appear. Generally, it is enough
to adjust the ‘Layer Height’, ‘Bottom Layer Count’, ‘Exposure Time’, and ‘Bottom
Exposure Time’.
5. After all parameters being set, click the [Slice] and a tip ‘Slicing’ will show at the bottom
right of the interface. When the slicing is done, a preview interface will display.
6. Click the [Save] to save the file type as ‘.svgx’ ; choose the folder and click [Save].
Settings
Default
FLASHFORGE Standard Resin Grey for 0.1mm
foto 13.3
foto 8.9
foto 6.0
Machine
Layer Height：
Bottom Layer Count：
Exposure Time：
Exposure Time：
Exposure Time：
Bottom Exposure Time：
Light-off Delay：
Bottom Light-off Delay：
mm
s
s
mm
mm
mm/min
mm/min
mm/min
10
10
65
65
150
0.1
1
8
Linear
6
80
s
0
s
0
Bottom Lift Distance：
Lifting Distance：
Bottom Lift Speed：
Lifting Speed：
Retract Speed：
Resin Print Gcode Advanced
Save
Network Sending
Machine：
Resin：normal
Volume：1.8 (ml)
Weight：2.0 (g)
Price：0.05$
Time：3h15m0s
Back
CHITUBOX V1.8.1
untitled*