Quick Start Guide

Each 3D printer has undergone a printing test before leaving the
factory. If there are residual consumables in the feed resin tank or
slight scratches on the printing platform, it is normal and will not
affect the use.
Dear customer:
Thank you for choosing and using the products of Flashforge Technology. Thank
you for your great support and help. The product quality and performance of
Flashforge Technology are excellent. For your convenience, please read the
manual carefully before use, and strictly follow the instructions of the manual.
The entire Flashforge Technology team is always ready to provide you with the
best quality service. No matter what problems you encounter during use, please
contact us according to the telephone and email provided at the end of the
manual.
In order for you to experience our products better, you can also obtain equipment
operating knowledge from the following channels:
01
Please unpack it carefully, you can take out the attached quick start guide from
the top layer of foam. The quick start guide will help you get familiar with the
device as quickly as possible and successfully complete the first printing
experience.
Note
Quick Starter Guide
Foreword
Safety tips: Please make sure to read the following safety
tips carefully
Work Environment Safety
Notice
Keep your work place tidy.
Do not operate in the presence of flammable liquids, gases or dust.
Children and untrained personnel should not operate the equipment alone.
Place Requirements
The device must be placed in a dry and ventilated
environment. The distances of the left, right and
back side space should be at least 20cm, and the
distance of the front side space should be at least
35cm.
Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
01