Quick Start Guide

3. Remove the model via the metal scraper and clean the model in the cleaning
box with anhydrous alcohol to wash off the excess resin.
4. After cleaning, dry the model via a dust-free cloth or an air gun. It would be
better to solidify the model again via curing box.
Note
During installation and removal of the build plate, please be extra careful to
prevent the LCD screen from damage by build plate falling down.
When the printing time is relatively long, please observe the printing regularly
to avoid accidents and stop printing if the model is incomplete or dropped.
Please make sure the printing environment keeps clean with less dust.
Please confirm the installation and leveling gaps for several times when do the
leveling if you are new to 3d printing.
10