User's Manual



Finder User Guide | www.flashforge.com 0086-0579-82273989
15
The picture displays the preheat interface. It
shows the actual temperature and the target
temperature. Tap the [Abort] button to abort
the preheat job.
Tools
Tap [Tools] to enter tool options.
yFilament: To load/unload the filament.
yLevel: To adjust the build plate.
yHome: To make the X, Y and Z axes back
to the zero point.
yManual: To manually adjust the positions
of X, Y and Z axes.
ySetting: To implement relevant function
setups.
yStatus: The check the real-time status of
the printer.
yAbout: Information about the printer.
yReturn arrow
Manual adjustment
yY+: The extruder moves to the zero point,
that is, the back of the machine
yY-: The extruder moves to the direction
opposite to the Y+.
yX+: The extruder moves to the zero points,
that is, to the right direction
yX-: The extruder moves to the direction
opposite to the X+.
yZ+: The build plate elevates.
yZ-: The build plate descends.