User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989
59
Pulley:
To select the equipped pulley type.
Status:
It displays the real-time status of the
extruder temperature, the platform
temperature and the internal
temperature.
About:
It displays the basic information about
the device.
7.2 Methods of printing
Printing from USB
1. Connect Inventor to the computerusing the included USB 2.0 cable.
2. Turn on the Inventor. Make surethe build plate is leveled and filamentis loaded to the
left extruder.
3. Select [ Print ] from menu bar, thenselect [ Connect ].
4. Click on [ Rescan ], then[ Connect ].
5. Now the printer is connectedwith FlashPrint. A status box at thelowerright corner