User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989
54
7.1.2 Dual-Extrusion Print
1.Open FlashPrint by double-clicking on the icon.
2. Press [ Load ] and choose an .stl filefrom hard drive.
3. The object will then be shown onthe screen.
4.Press [ Load ] and choose another(or the same) file from hard drive.
5. Click on the object and then clickon [ Extruder ], select [ Use leftextruder ].
NOTE: one object is turned to green,that indicates it will be print witthe left
extruder.
6. Now the 3D model is ready to be created.
Before introducing the connection methods, let me give you a brief introduction of
Inventor’s interfaces.
Print
Read the print file from
The local memory card
The SD card
Return arrow