User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989
48
password are both“admin.” The control panel will appearafter a successful login.
6-21
5. Click on [ Work Mode ] and choose“AP+STA mode” and save it.
6. Click on [ STA Setting ], selecta working network, enter thecorresponding password
and save.
6-22
7. Restart the interface, close thepage, turn off the Inventor, disconnectfrom the
network, and wait for 10seconds.
8. Turn the Inventor back on andconnect to the Inventor network. InFlashPrint, choose
[ Print ] from menuand select [ Connect ].
9.Under “Connection Mode”, select