User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989

③Material type: Choose according to the type of model

④Supports: When print with model contains part hanging in the air or top-heavy,

support is necessary. Click [supports] to create support part for the printing.

⑤Raft: This function will help the model to stick well on the platform.

⑥Wall: During dual color printing, this function will help to clear the leaking

filament of another extruder.

⑦Vase Mode: No capping for the model

⑧Resolution：You have three resolution solution(with default setting)to choose from,

high resolution is corresponding with slow printing speed, opposite for the low

resolution.For PLA printing, an extra solution “Hyper” is available.

⑨More options: Click [More options] to set for layer, shell, infill, speed and

temperature. Different resolution solution is corresponding to different defaults, click

[Restore Defaults] to back to default setting.

●Layer

a. Layer: Layer thickness of the printing model. With a small number, the

surface of the model will be more smooth.

b. First Layer Height: This is the first layer of the model, which will affect the

sticking performance between the model and platform. Maximize is 0.4mm, usually

the default is ok.

c. Shell: Contains of the outside shell number, capping layer number (under vase

pattern, top solid layer setting is invalid.)

● Primeter Shells: Maximize is 10

a. Top Solid Layer: Maximize is 10, minimum is 1.

b. Bottom Solid Layer: Maximize is 10, minimum is 1.

● Infill