User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989

6.2.3 Loading

You can load a model file or Gcode file into your Flashprint by the following six

methods:

Method 1: Click the Load icon on the main interface. Then select the

object file.

Method 2:Select the file for loading and drag thefile to the main interface of the

software.

Method 3:Click [File]--[Load File]. Then select the object file for loading.

Method 4: Click[File]--[Examples] to load the example files

Method 5: Click [File]--[Recent Files] to load the files opened recently.

Method 6: Select and drag the target file to the icon of Flashprint.

Note: .STL, .OBJ, .3MFand .FPP, ways to store 3D models, are supported by

Flashprint for editing.

Generating Rilievo

Loading a png, jpg, jpeg, bmp picture file into the FlashPrint. And the following

dialogue box(6-4) will pop up. The setting box includes settings for shape, mode,

maximum thickness, base thickness, bottom thickness,width, height, top diameter and

bottom diameter.

Shape: including plane, tube, canister and lamp.

Mode: including “darker is higher”and “lighter is higher”.

Maximum thickness: Z value of the model

Base thickness: The minimum raft thickness and the default value is 0.5mm

Cut the model into several parts

Print it directly with your Inventor or export to your USB stick.