User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989
25
Chapter 5: Build Plate Leveling
A correctly leveled build plate will almost always guarantee a quality3D object. When
printed objects have issues, the first step to diagnoseis to check and double-check to
make sure the build plate is leveled. Ageneral rule of thumb is to leave a gap that is the
thickness of a pieceof paper. However, for printing finer objects (150 micron and
lower),please use a feeler gauge to level the build plate as it requires a lesser
gapbetween the nozzle and the build plate.
The Inventor utilizes a three-point leveling system for its build plate. Atthe bottom of
the build plate, there is one spring-loaded knob in thefront and two in the back.
Tightening the screw will create a bigger gapbetween the build plate and the nozzle
while loosening it will createlesser gap.
5-1
1. （5-1）From the main menu, select[Tools] and [Level]. The extruder andthe build
plate will begin to move to thestarting position.
5-2