User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989
22
(4-10)Select [ Filament ] and [ Load Left ].
4-11
(4-11)Wait for the extruder to heat up to theoperating temperature. The extruderwill
alert you once it is at the operatingtemperature. Load the filament byinserting it into the
extruder at anupright angle.
(4-12)Filament will start to extrude out of thenozzle. Continue loading to ensure thatthe
filament is extruding in a straight line.Refer to the troubleshooting section ifthe
filament is extruding at an angle.
Unloading filament:
4-12