User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989
20
(4-5) Feed the filament through the filament guide tube. Attach the guide tube onto
the two filament guide tube brackets.
(4-6) Stick the build sheet to the build plate after installing filament, as picture shows.
4.3 Plugging in Power Cord&USB Cable
(4-7) Locate the power cord, and plug it intothe Inventor.
Optional: Locate the USB cord andplug one end into the Inventor and theother into
your computer. The Inventorsupports USB .
4-6
4-7