User's Guide

Inventor User Guide |www.flashforge.com 0086- 0579-82273989

(4-3)Install the side fan duct. To do this,find the side fan duct and attach it ontothe left

side of the extruder set. Secure itwith the supplied M3x8 screw.

Tip: place the M3x12 screw through themounting hole of the extruder seat

first.Afterwards, align the extruder set and tighten.

4.2 Installing Filament

(4-4) Lock the filament in place by securing it with the filament spool holder and

turning it counter-clockwise.

4-3

4-4