User's Manual

01 02
03
04
05
06
07 08 09 10
11 12 13 14
15 16 17
18
2019
Cut four white cable ties that used to hold
the rods in place.
7.
9.
Double check the foam, it should contain:
filament, material rack, nozzle, remove
tool, needle, wrenches and screwdrivers.
8. Cut the three black cable ties: one for
fixing X-axis synchronous belt, two for
fixing Y-axis synchronous belts on both
sides.
10.
11.
Discard the blue protective tapes all
around.
Congratulations! You’ve unpacked your
printer. Please keep the kit and packing
for future use.
21 22