User's Manual

First Print

1. Tap [Build]. 2. Tap [Disk].

4. Tap [Build] icon. 3. Select model.

1. Ensure that the build plate has been leveled before printing.

2. Ensure that the ﬁlament has been loaded in an appropriate approach.

3. Please clean extruder before printing (Load the ﬁlament for a while to extrude all the melted

ﬁlament you printed last time out of the extruder).

4. Do not leave the printer unattended during operation.

01 02

07 08 09 10

11 12

15 16 17

Suggestions

2019 21 22

Decompressed the slicing software package in

the USB ﬂash drive and install it to your

computer. Open the software, load the stl ﬁle

for slicing, then saved the sliced ﬁle to the USB

ﬂash drive.

Insert the USB ﬂash drive, tap [Print],

select a ﬁle to print.