User's Manual

2. Tap [Load]. 1. Tap [Control].
3. The extruder is heating to the targeted temperature automatically.
4.
Loading Filament
01 02
03
04
05
06
07 08 09 10
11
12 13 14
15 16 17
18
The auto-load is start to load the filament when
the targeted temperature reached. Do not stop
loading when the nozzle extrudes the filament.
It is suggested that load the filament evenly
then tap [OK].
5.
Tap [OK] to back to the homepage.
2019 21 22