User's Manual

How to use the nuts
Rotate the nuts clockwise
Raise the build plate to reduce the distance
between the nozzle and build plate.
Lower the build plate to increase the distance
between the nozzle and build plate.
Rotate the nuts Anticlockwise
Build plate goes up
Build plate goes down
Leveling Build Plate
1. Put a piece of A4 paper on the build plate, tap the touchscreen [Control] - [Level] and
wait for the extruder moving to the first leveling point.
Before leveling, let's learn the function of nuts.
2.
01 02
03
04
05
06
07 08 09
10
11 12 13 14
15 16 17
18
Lightly pull the A4 paper and feel the friction. If the friction is too big to move, tap [↓] to increase
the distance of nozzle and build plate; if the friction is too small, tap [↑] to reduce the distance of
nozzle and build plate. It is better that pulling the paper and feel the significant frictional
resistance until the slight scratches appear without damage. Tap [Next] to do the second level
point.
2019
Click the arrow to adjust the platform
so that it just touches the nozzle
Z axis offset: 1.5
Back
Next
21 22