User's Guide

28
Factory Setting: Delete all data in internal memory, return the printer to factory setting.
Led: To turn on/off the light.
Update: To update printer firmware.
Shows the basic information about the printer.
Notice: When contacting after-sales support, please give your Serial No to after-sales
engineer, which is showed in the [About] interface.
About:
1/2
<
Machine Type:
Serial No:
RegisterCode:
Firmware Version:
Adventurer 3
123456
WWNKDO
1.0.0 20170909
2/2
<
Build Volume:
Usage counter:
IP Address:
150 x 150 x 150
12 hours
10.90.243.184: 8899
< <
Update
Buzzer
FactoryReset
Start
Factory Setting
Delete all data
in internal memory
ok
Restored to factory setting
Completed!
3/3
< <