Quick Guide

 When in use, open the Type-C interface cover of the device and insert the
configured cable, which can be connected to the display on the monitor or
other long-distance transmission.

Notes:
 Because the uncooled infrared telescope uses a very sensitive thermal sensor,
under any circumstances (on or off), the lens must not be aimed directly at a
strong radiation source (such as the sun, direct laser beam or reflection, etc.) Or
else, permanent damage would happen to the uncooled infrared telescopes!
 Use the lens cleaning cloth and water to gently clean the infrared lens. Do not
use organic solvents or sharp and hard objects to clean the infrared lens, in case
to cause the lens film falls off!
 After the laser ranging function is turned on, please do not irradiate the human
eyes to avoid injury!
 Please check the power when the device is used for the first time, if necessary,
charge it for three hours before using it. When charging by USB, please place
the device at room temperature.
 Do not open the case or modify it without authorization. Maintenance can only
be done by authorized personnel of our company.
