User's Manual

Lens focus
 After the device start-up and sees the image display, adjust the
lens focus ring to a clear image (clear target contour)
Charging, data interface
 When charging, unscrew the charging interface cover and insert
the Type-C charging connector (charging time is about 3~4 hours,
charging voltage DC5V).
 Unscrew the charging port cover, connect to a computer, and copy
photos and video data files.
Attention
 Because the uncooled infrared telescope uses a very sensitive
thermal sensor, it is not allowed to directly aim the lens at a strong
radiation source (such as the sun, direct or reflected laser beam,
etc.) under any circumstances (turn on or off), otherwise it will
Permanent damage to the refrigerated infrared telescope!
 Please check the power when the instrument is used for the first
time, charge it before use if necessary, and place the instrument at
room temperature during USB charging.
 Do not open the case or modify it without authorization.
Maintenance can only be carried out by authorized personnel of
our company.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.