User's Manual

function, short press the "zoom" and "photograph" keys to select yes/no formatting
function, short press the "color palette" key to confirm.
3. Restore the factory settings option, short press the "color palette" key to
select this function, short press the "zoom" and "photograph" keys to select yes/no
restore the factory settings function, short press the "color palette" key to confirm.
4. Manual dot option, short press the "color palette" key to select this function,
the cursor and its X, Y axis coordinates will appear, short press the "zoom in" and
"photograph" keys to select the "X/Y" coordinates, short press the "color palette"
"Key to confirm, short press "zoom in" and "photograph" key to change the
coordinate value, short press "color palette" key to confirm. After coincident with the
dead pixel coordinates, short press the "Power" key to do the dot, long press the
"color palette" key to save and exit.
5. Upgrade options, short press the "color palette" button to select this function,
short press the "zoom" and "photograph" keys to select yes/no upgrade, and short
press the "color palette" button to confirm. Before the upgrade,first connect the
instrument to the computer through the data cable,then create a new mcubin folder in
the disk,and finally put the upgrade program into the folder for upgrade.
Combination function
 Cross-hair Setting
Press and hold the electronic zoom button and the color palette
button for 3 seconds at the same time to turn on the cross-hair
setting function. Short press the "Zoom in" or "Photograph"
button to select the cross-section pattern, short press the "Color
palette" button to confirm, and short press the "Zoom in" or
"Photograph" button to select the position of the cross-section
(X/Y axis) that needs to be adjusted. Short press the "color
palette" key to confirm, short press the "zoom in" or "photograph"
button to perform position calibration, short press the "color
palette" key to confirm after completion, long press the "color
palette" key to save and exit.
 Manual Image Correction
Press and hold the "Zoom" and "Photo" buttons simultaneously
for 3 seconds,the scope will manually correct the image.