RS1 Scope Quick Start Appearance, button and composition Button and function description Power button Long press 3 seconds to switch on/off the thermal camera;
After power on, short press power button to turn off eyepiece display, short press again to wake up the eyepiece. Digital zoom button Short press, X2、X3、X4 image digital zoom switch，Can zoom in and out on the target in real time; Long press 3 seconds, image manually calibration. Photo button Short press: photograph; Long press: start video recording, short press again to end the video recording.
Color mode switch Image Picture-in-picture WIFI Image calibration Cursor adjustment Distance estimate Hot spot tracking Brightness adjustment Contrast adjustment System settings Color mode menu Press and hold the menu knob for 2 seconds. After popping up the menu, there are four color modes (black hot, white hot, red hot, iron red), turn the knob to select the color mode and short press the menu knob to confirm.
Press and hold the menu knob for 2 seconds. After popping up the menu, turn the knob to select “on/off” and short press the menu knob to confirm. WIFI button Press and hold the menu knob for 2 seconds. After popping up the menu, turn the knob to select “on/off” WiFi function and short press the menu knob to confirm. If the WiFi logo appears at the top right of the main screen, it proves this function to be turned on normally.
Cursor adjustment Press and hold the menu knob for 2 seconds. After popping up the menu, turn the knob to select”N/A/Standard/Ranging”, short press the menu knob to confirm. Then adjust the cursor position, turn the knob to select the “X/Y” coordinate, short press the menu knob to confirm, turn the knob to change the coordinate value, and short press the menu knob to confirm. Distance estimate Press and hold the menu knob for 2 seconds.
Hot spot tracking Press and hold the menu knob for 2 seconds. After popping up the menu, turn the knob to select “on/off” hot spot tracking function and short press the menu knob to confirm. Brightness adjustment Press and hold the menu knob for 2 seconds. After popping up the menu, turn the knob to adjust brightness value (0~100), short press the menu knob to confirm. Contrast adjustment Press and hold the menu knob for 2 seconds.
System settings Press and hold the menu knob for 2 seconds. After popping up the menu, will appear the following submenu: 1. Language option，short press to select the function, turn the knob to select “Chinese/English” language option, and short press the menu knob to confirm. 2. Memory format options, short press to select the function, turn the knob to select “Yes/No” to conduct format operation, short press the menu knob to confirm.
3. Factory default option, short press to select the function, turn the knob to select “Yes/No” to conduct factory default operation, short press the menu knob to confirm. 4. Image enchance option, short press to select the function, turn the knob to adjust brightness value (0~60), short press the menu knob to confirm. 5.
6. Low consumption option，short press to select the function, turn the knob to select “Yes/No”, short press the menu knob to confirm. Under low consumption mode, the functions of photographing, recording and WiFi cannot be used, which will increase the usage time. Eyepiece diopter adjustment According to individual vision, after starting up and seeing the image, turn the diopter knob to see the battery logo of the screen clearly, it proves the diopter adjustment finsihed.
and copy the photo and video data files. Attention As the uncooled infrared scope uses very sensitive thermal sensors, so in any case (power on or power off), do not aim the lens at the strong radiation source (such as the sun, laser beam direct or reflection), otherwise it will cause permanent damage to the uncooled infrared thermal scope! Do not open the shell or modify it without permission. The maintenance can only be carried out by the authorized personnel of the company.
FCC Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
