Quick Use Guide

US
B charging/data interface
 When charging, remove the interface cover of the device and insert the Type-C
charging cable (voltage DC5V/2A) for charging.
 Open the interface cover of the device, connect the computer with a USB cable,
and copy photos and video data files.
R
eal-time video output
 When in use, open the interface cover of the device and insert the HDMI cable to
access the display on the monitor or other long-distance transmission.
A
ttentions:
 Because the uncooled infrared telescope uses a very sensitive heat sensor, do not
point the lens directly at a strong radiation source (such as the sun, laser beam, or
reflection) under any circumstances (starting or shutting down), otherwise
permanent damage will be caused to the uncooled infrared telescope!
 Use a wiping cloth with water to gently wipe and clean the infrared lens. Do not
use organic solvents or sharp hard objects to clean the infrared lens, so as to
avoid the lens film falling off!
 laser ranging function once is opened, do not shine on the eyes, so as not to
cause harm!
 When the device is used for the first time, please check the power, if necessary,
charge for three hours before use. If USB charging, please place the device at
room temperature environment.
 Do not open the enclosure or modify it without authorization. Maintenance
matters can only be carried out by authorized personnel of our Company.