Quick Use Guide of Infrared Thermal Imaging Camera MS715 series Buttons & Interface
No.
GPS Location Pitch Angle value Horizontal roll Angle value M e m o r y c a p a c i t y S c e n e m o d e P s e u d o c o l o r I m a g e I m a g e s c h e m a m a g n i f i c a t i o n s E x t e r n a l W i r e l e s s v i d e o h o t s p o t o u t p u t L o w p o w e r m o d e B a t t e r y S y s t e m t i m e
t a t e Operation Interface figure.1 Menu Menu Interface figure. 2 Menu operation To enter the menu mode: press and hold the To switch functions and adjust parameters: press Zoom in key. . Confirm function: Press Menu key to select the function.
Function return : press the laser key to return to the upper menu, and hold down to exit the menu. Menu instruction Picture-in-picture: picture: The center area is enlarged 2 times by default. When Zoom in is started, the image in the picture is enlarged by 2X, 4X, 8X and 16X cycles. WIFI： Android system can go to the official website to download the mobile phone client program "IR-TRACKER TRACKER Ⅴ".
Hotspot tracking cking function: When enabled, it can assist to track the highest temperature target. Cross demarcation setting: When the cursor is turned on, you can select two cursor styles (styles 1, 2), three cursor colors cursor X-axis and Y-axis Y (red, yellow, and green), and move the . Device brightness setting: supports adjustment of the screen brightness of the 55-level eyepiece display.
GPS function: when enabled, the device can be self-positioned. positioned. Electronic compass function: when started, the device can display the horizontal roll and pitch Angle value in real time. System Settings: the following functions of the instrument instrument can be set after entering the system. Compass correction: The electronic compass can be re-corrected. re corrected.
USB charging/data interface When charging, remove the interface cover of the device and insert the Type-C charging cable (voltage DC5V/2A) for charging. Open the interface cover of the device, connect the computer with a USB cable, and copy photos and video data files. Real-time video output When in use, open the interface cover of the device and insert the HDMI cable to access the display on the monitor or other long-distance transmission.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
