User's Manual

VIII
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
 FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of
20cm between the radiator and any part of your body.
Operation and Maintenance Requirements
 Please do not dismantle the device privately.
 Please do not touch sensor CCD or CMOS directly; use hair drier to remove dust or dirt
from the lens surface.
 Please use soft dry cloth or clean soft cloth to dip a little mild detergent to clean the device.
 Please do not touch or wipe the lens surface directly.
 Please use the accessories provided by manufacturer and it shall be installed and repaired
by professional staffs.
 Please avoid laser beam radiation to the surface when using laser beam device.
 Please do not provide two or more power supply modes to the device at the same time;
otherwise, it may damage the device.
 Max 1 aircraft is allowed to fly in the same area at the same time.
 Please make sure that there is no occlusion above the flight.
Privacy Protection Notice
As the device user or data controller, you might collect personal data of others' such as face,
fingerprints, car plate number, Email address, phone number, GPS and so on. You need to be
in compliance with the local privacy protection laws and regulations to protect the legitimate
rights and interests of other people by implementing measures include but not limited to:
providing clear and visible identification to inform data subject the existence of surveillance
area and providing related contact.
About the Manual
 The Manual is for reference only. If there is inconsistency between the Manual and the
actual product, the actual product shall prevail.
 We are not liable for any loss caused by the operations that do not comply with the Manual.
 The Manual would be updated according to the latest laws and regulations of related
regions. For detailed information, see the paper User's Manual, CD-ROM, QR code or our
official website. If there is inconsistency between paper User's Manual and the electronic
version, the electronic version shall prevail.
 All the designs and software are subject to change without prior written notice. The product