User's Manual

prompt, along with buzzing. Meanwhile, the aircraft returns automatically.

4.5.2.1.3 Other Settings

Select “Settings > Flight Control Settings > Fence Settings”.

 Set radius and altitude.

 Set trigger distance.

For example, when the fence type is set as radius + altitude, the radius is set as A meters and

altitude is set as B meters, and if the trigger distance is set as C meters, then it will trigger RTH

or landing when the aircraft is (A-C) meters away from the HOME point horizontally or flight

altitude exceeds (B-C) meters; the aircraft will implement the action of RTH or landing.

4.5.2.2 Enable Electronic Fence

Enable electronic fence after setting fence area.

Select “Settings > Flight Control Settings”, enable electronic fence on the right of the “Fence

Enable”.

Figure 4-25

4.5.3 Preview Settings

Set resolution, frame rate and max. bandwidth of preview image according to requirements.

Select “Settings > Flight Control Settings > Preview Settings” and enter the preview Step 1

setting interface, as shown in Figure 4-26.

Figure 4-26

Select “Settings > Flight Control Settings > Preview Settings > Image Transmission Step 2

Settings”.