User's Manual

45
3.8.4 Geomagnetic Abnormity
Abnormity Prompt
 Aircraft indicator ●●● flashes.
 Remote control prompts “Geomagnetic Abnormity”.
Possible Reasons
 The use position has changed a lot, which means the geographical location is quite far
away from the last geographical location where the aircraft is used, causing big change to
geomagnetic field.
 There is another intensive magnetic field or abrupt change in the environment, affecting
geomagnetic field.
Solutions
Select “Settings > General > Other > Geomagnetic Calibration” on the remote control. Step 1
The system displays “Geomagnetic Calibration” interface, as shown in Figure 3-28.
Figure 3-28
Click “Start Calibration”. Step 2
Keep the aircraft horizontal and rotate it for 360° horizontally, as shown in Figure 3-29. Step 3