User's Manual

42
3.7 Enable Aircraft Power
After power on, when the remote control doesn’t require other operations, please always keep
the aircraft horizontal and static; otherwise, it may result in initialization failure.
The battery is full if 4 indicator lights are green.
Insert intelligent battery of the aircraft, short press power switch, and green indicator light
indicates present battery electricity, as shown in Figure 3-25.
Figure 3-25
3.8 Check and Debugging
The subsequent steps can be implemented only after checking and debugging all the items
listed in the chapter below. Besides, the remote control prompts that each state is normal and
the aircraft indicator light flashes green.
It is recommended to set the display image of remote control as video preview mode before
taking off.
Check operation condition. Please debug each component to make it operate normally when
both remote control prompts abnormity.
It is going to list common calibration items, abnormities and solutions in the following chapter.