User's Manual

36
Figure 3-17
3.6.4 Confirm Remote Control Mode
It is mode 2 by default. Please set in “Settings > RC Settings > Joystick Mode” to switch mode,
as shown in Figure 3-18.
Figure 3-18
Please refer to “4.2.4 Manual Flight Control” for remote control mode and its corresponding
relations.
3.6.5 Set Quick Operation
Click at the upper right corner of main interface, set quick operation items of remote
control interface, view dashboard, and set PTZ, image transfer, flight task, flight path and stop
beep.
3.6.5.1 Dashboard
View parameters of remote control dashboard.
Click “Dashboard”, and the system enters “Dashboard” interface, as shown in Figure 3-19.