User's Manual

32
Please refer to actual product.
 Please implement demounting step first and then connection step when the PTZ camera
needs to be replaced.
 It only needs to implement demounting step when the aircraft flies directly without PTZ
camera.
3.4.1 Dismantle PTZ Camera
Hold 2 handles of the PTZ camera with both hands and pull them downwards, as Step 1
shown in Figure 3-9.
Figure 3-9
PTZ camera is separated from the aircraft, so it is dismantled quickly. Step 2
3.4.2 Install PTZ Camera
Insert the upper port on the vibration damper plate of the PTZ camera into Step 1
corresponding port at the bottom of the aircraft, as shown in Figure 3-10.
Figure 3-10