User's Manual

Getting Started 9
Add successfully Figure 2-8
Configure the name of the base station and the DST as needed, and then tap Step 7
Complete.
 The time zone and DST configurations have influences on the app function, please
configure properly.
 If you have more than one device, follow from step 3 to add them one by one.
 If the network configure failed, reset the device and add it again.
2.3 Pairing Camera
On the base station: Press the SYNC button, and then the system indicator on the base Step 1
station flashes with white light.
On the camera: Press the SYNC button, and then the indicator on the camera flashes Step 2
with green light.
The pairing starts, and the indicators flash as described below: Step 3
 The system indicator on the base station stays on with white light for 10 s, and
then off.
 The indicator on the camera stays on with green light for 10 s, and then off.
The pairing succeeded then.
 You can pair six cameras at most with one base station, and pair one camera at a